|
* With MINI2440 PIN-TO-PIN compatible, and share same carrier board of EM2440
* Processor: Samsung ARM9 S3C2416X 400MHz with separate 16KB instruction and
16KB data caches, 2D Accelerator
* 128MB DDR2 RAM,133MHz
* Default mounted Nand Flash 256MB NAND Flash, Samsung K2F2G08. It can be
replaced into among 256MB to 2GB immediately
* Preinstalled Linux2.6.21
* Power supply: 3.3V, 5V
* LCD, AD, SPI, UART, USB, SD/MMC, Ethernet, IIS, I2C, RTC, PWM, GPIO, Local bus
and all I/O CPU lines can be extended via board-to-board connectors
* Optional module: GPRS/GSM,WIFI and GPS
EM2416 Development Board offers true rapid development solutions by providing all the necessary ingredients to jump start embedded designs. The board includes the MINI2416-III SOM and Carrier Board pre-installed Linux OS. The mother board integrates a rich set of peripherals and interfaces including Ethernet, USB Host &Device, Serial ports, Audio, LCD, Keyboard, SD/MMC, Buttons, LEDs and etc. The board has complete electronic documentation, schematics, demo applications, and third party industry-standard C compilers and embedded development environments for evaluation.
Boardcon also backs up our kits with a Start-Up Guarantee. We invite you to make use of our free technical support until any start-up problem you might encounter is solved. The positive out-of-box experience with the Rapid Development Kit illustrates Boardcon's continuous commitment to providing customers with effective embedded solutions by offering a hands-on, industry-centric entry point for embedded developments, which is a key starting point for OEMs needing to have a complete solution up and running under very short development time constraints.
If somewhere on the board don't meet your specification of your project, we will modify the board for a semi-custom solution. When needed, we will develop a new embedded SBC or peripheral board to meet your requirements. Depending on the design agreement, you might maintain sole ownership of the final product, or we might add the product to our COTS product line.
|
Feature |
Specifications |
|
CPU |
Samsung ARM9 S3C2416X 400MHz with separate 16KB instruction and 16KB data caches, 2D Accelerator |
|
SDRAM |
128MB DDR2 RAM,133MHz |
|
NAND Flash |
Default mounted 256MB, Samsung K2F2G08. It can be replaced into among 256MB to 2GB immediately |
|
Power |
3.3V power supply for CPU board |
|
Connector |
DC-2.0mm pitch board-to-board connectors |
|
Dimension |
37mmx74mm |
|
Feature |
Specifications |
|
Serial Ports
(UARTs) |
COM-0 - RS232, five-wire DB9 RS232 serial port
COM-1 - RS232, three-wire available via 2mm pitch 3 pins
COM-2 - RS232, three-wire available via 2mm pitch 3 pins |
|
LCD |
The LCD port integrated 4-wire resistor touch screen port. The board comes with driver for 4.3" and 7" TFT LCD (the resolution is 800*600) |
|
Ethernet |
Davicom DM9000A MAC & PHY, 10/100BaseT, Activity LED's |
|
USB |
USB1 Host, 12 Mbps ,USB2 Device,12 Mbps |
|
JTAG |
1 X 2mm pitch 20 pins JTAG Port |
|
Keyboard & mouse |
USB, keypad is working via USB |
|
Audio codec |
Adopt UDA8731 Audio chip, Audio input and output slot |
|
ADC |
Adjustable resistor is connected with pins of ADC to check analog/digital change |
|
RTC |
Real Time Clock, powered by external lithium battery |
|
Buzzer |
On-board PWM function test unit |
|
Device support |
1 x SD/MMC card socket, Supports Multimedia Card, Secure Digital and Secure Digital I/O communications protocols up to 2GB |
|
General Purpose I/O |
A 40-pin GPIO Expansion Connector |
|
BUS |
A 40-pin BUS extended interface |
|
LED |
4 x Status LED |
|
Buttons |
4 Programmable User Buttons |
|
Dimension |
105mmx128mm |
|
Expansion Module |
Module Detail |
Linux |
Wince |
|
WiFi Module |
USB WiFi Module, supports IEEE 802.11b/g |
√ |
x |
|
GPS Module |
GPS Module, GS-87 |
√ |
x |
|
GPRS/GSM Module |
GPRS Modules, USB and Serial Interface |
√ |
x |
|
OS |
Feature |
Description |
|
Linux2.6.21 |
Bootloader |
u-boot 1.3.4
1. Supporting Nand Flash erase/write/read
2. Supporting set, save Environment Variables
4. Supporting SD Card boot-up(replace JTAG)
5. Supporting bootm, bootargs setting |
|
Kernel and drivers |
Kernel: linux2.6.21
drivers:
Serial ports, RTC, LCD, Touch Screen, SD card, Audio, Nand flash, WIFI, GSM/GPRS, GPS, supporting update image from SD |
|
File system |
Yaffs File System, busybox, Provided Lib(ALSA-lib, tslib, glibc), udev support |
|
Embedded GUI |
Qtopia2.2.0 |
|
Cross complier Environment |
Cross-4.2.2-eabi | |
