회사소개
협력사
Terasic-FGPA Series
All FPGA Main Board
- Stratix III, IV, V
- Arria II. V
- Cyclone II, III, IV, V
- Bundle Solution
- USB Blaster
- max10
Daughter Card
- Interface conversion
- Video & Image
- Networking
- AD/DA
- Capsense
- Multimedia
- RF
SOC Platform
Microtronix-FPGA Series
IP Core
HSMC Daughter Card
Configurable Processor
FPGA Board
- HD Dev Solution
University Training Classes
Universities Classes using the DE2 Series
Altera 온라인 데모
Design Software
Embedded Processors
Licensing
Bundled Solutions
ARM Development Kit
ARM Development Kit
Single board computers
Computer-on-Module
AS 수리
dimocore.com/terasicrepair
자료실
고객센터
공지사항
문의게시판
 
 
ARM Development Kit > Single board computers
   
EM2440-III 
 
가    격 : 견적문의
중    량 : 500g




* 
Samsung ARM9 S3C2440A ARM920T, up to 400MHz.
* Nand Flash can be updated into 1GB and SDRAM can be updated into 128MB immediately according to the customer requirement.
* Providing original schematic drawing and reference PCB files for board manufacturing 
* One Key to update Boot-loader, Kernel, Yaffs, NK.bin and one Key to configure parameters of Linux.
* 2mm pitch 20-pin Camera interface with driver
* Supporting Cramfs/ramfs/etx2/fat32/nfs/yaffs 
* System parameters can be saved in REGEDIT, and residual Flash can be read and written
* The system can be updated via USB interface. 
* Supporting WinCE 6.0 and Linux 2.6.25/Linux2.6.30
* Optional module:  GPS, GPRS, CDMA, Camera, Printer, WIFI, AV, VGA 
* Modular Design: Carrier board-128mm x 105mm; CPU board- 74mm x 37mm


EM2440-III offers true rapid development solutions by providing all the necessary ingredients to jump start embedded designs. The board includes the MINI2440 SOM and Carrier Board pre-installed Windows Embedded CE or Linux OS. The mother board integrates a rich set of peripherals and interfaces including Ethernet, USB Host & Device, Camera, Serial ports, Audio, LCD, Keyboard, SD/MMC, Buttons, LEDs and etc. 
The board has complete electronic documentation, schematics, demo applications, and third party industry-standard C compilers and embedded development environments for evaluation.
Boardcon also backs up our kits with a Start-Up Guarantee. We invite you to make use of our free technical support until any start-up problem you might encounter is solved. The positive out-of-box experience with the Rapid Development Kit illustrates Boardcon's continuous commitment to providing customers with effective embedded solutions by offering a hands-on, industry-centric entry point for embedded developments, which is a key starting point for OEMs needing to have a complete solution up and running under very short development time constraints.
If somewhere on the board don't meet your specification of your project, we will modify the board for a semi-custom solution. When needed, we will develop a new embedded SBC or peripheral board to meet your requirements. Depending on the design agreement, you might maintain sole ownership of the final product, or we might add the product to our COTS product line.


Feature

Specifications

CPU

Samsung S3C2440A ARM920T core,0.13um CMOS Standard cells, around 1.2V internal ,
1.8V/2.5V/3/3V memory,
3.3V external I/O microprocessor with 16KB I-Cache/16kb D-Cache/MMU, UP to 400 MHz. Interrupt controllers, Timers

SDRAM

32bit,100MHz, default mounted 64MB SDRAM, it can be replaced into 128MB

NAND Flash

Default mounted 64MB, it can be replaced into 128MB to 1GB

NOR Flash

2 Mbytes, bootable. It can be replaced into 8MB

Core-Power

1.25V Kernel Voltage

Power

3.3V power supply for CPU board

Connector

DC-2.0mm pitch board-to-board connectors

Dimension

37mmx74mm

Feature

Specifications

Serial Ports
(UARTs)

COM-0 - RS232, five-wire DB9 RS232 serial port
COM-1 - RS232, three-wire available via 2mm pitch 3 pins
COM-2 - RS232, three-wire available via 2mm pitch 3 pins

LCD

The LCD port integrated 4-wire resistor touch screen port. The board comes with driver for 3.5 inch, 4.3 inch, 7 inch and 10.4 inch TFT LCD (the resolution is 800x600)

Ethernet

Davicom DM9000A MAC & PHY, 10/100BaseT, Activity LED's

USB

USB1 Host, 12 Mbps ,USB2 Device,12 Mbps

Camera

2mm pitch 20-pin, 1.3 Megapixels CMOS camera interface

JTAG

1 X 2mm pitch 20 pins JTAG Port

Keyboard & mouse

USB, keypad is working via USB

Audio codec

Adopt UDA1341 Audio chip, Audio input and output slot

ADC

Adjustable resistor is connected with pins of ADC to check analog/digital change

RTC

Real Time Clock, powered by external lithium battery

Buzzer

On-board PWM function test unit

Device support

1 x SD/MMC card socket, Supports Multimedia Card, Secure Digital and Secure Digital I/O communications protocols up to 2GB

General Purpose I/O

A 40-pin GPIO Expansion Connector

BUS

A 40-pin BUS extended interface

LEDs

4 x Status LEDs

Buttons

4 Programmable User Buttons

Dimension

105mm x 128mm


Expansion Module

Module Detail

Linux

Wince

WiFi Module

USB WiFi Module, supports IEEE 802.11b/g

CMOS Camera

1.3 Megapixel, OV9650

GPS Module

GPS Module, GS-87

Thermal Printer

Thermal Printer

x

GPRS Module

GPRS Modules, USB and Serial Interface

AV Module

BNC interface, SAA7113H chip inside

x

VGA Module

VGA Module, resolution up to 1024x768, ALTERA Cyclone II EP2C5Q208C8N FPGA chip


    .  
3.5Inch TFT LCD Data Sheet.pdf
    .  7Inch TFT LCD Data Sheet.pdf
    .  EM2440-III Overview.pdf


OS

Item

Feature

Description

Linux2.6.25
Linux2.6.30

Bootloader

Boot

 

Start up system, supporting one Key to update Bootloader, Kernel, Yaffs, NK.bin and one Key to configure parameters of Linux. Also can be configured the board booting from Yaffs or NFS

Tftp

Support tftp transmitting protocol

File system

Yaffs

Kernel

Support writing kernel image into nand flash and kernel parameter setting

Etc.

Support via USB and Serial Interface to download application to flash debug

Kernel

Version

Linux kernel 2.6.25.8

File system

CRAMFS/RAMFS/EXT2/FAT32/NFS/YAFFS/YAFFS2

Serial device

Three serial ports

10/100M  Ethernet

DM9000

RTC

RTC driver

USB Host

USB Host, USB Slave driver

LEDs

Four LEDs driver

Buttons

User buttons

Language

Multi-language Support

LCD

Coming with driver for 3.5", 4.3", 7" and 10.4" TFT LCD (resolution 800*600)

Touch panel

Touch panel driver

SD/MMC card

SD/MMC card driver

Sound

UDA1341

CMOS Camera

CMOS Camera driver

USB Camera

The chip of USB Camera is Vimicro 301p, the USB Camera is collecting dynamic picture and showing on the  LCD

GPRS Module

Using GPRS Module to dial-up to Ethernet, the speed is  up to 90Kbit/s

CDMA Module

Using CDMA Module to dial-up to Ethernet, the speed is  up to 90Kbit/s

Printer

Thermal Printer GP-586OIII

Embedded GUI

Qt/Embedded

Qtopia 1.7.0 and Qtopia 2.2.0

Application

Servfox

The application is running under Console platform, it controls the USB Camera by internet and displays the picture taken by camera on the LCD. It can be taken as net monitor when the application works with USB Camera.

Spcacat

It is a camera picture capture application under Console platform

Snapshot

It is a LCD picture capture application under Console platform

Rz and sz

It is a application that transfer and receive file by serial port

Madplay

It is a MP3 player

Network protocol

TCP/IP

TCP/IP protocol

Telnet

Telnet server, telnet remote login

File transfer

FTP Client/server

Web server

boa web server

USB port supported Devices

U-disk, portable hard-disk, USB mouse, USB Keyboard, USB HUB, USB Camera and so on.

Command commands

cat, chmod, discard, echo, flashfsd, flashwrite, free, genhtml, hostname, init, kill, loader, ls, mkdir, mount, ps, reboot, rm, smanaged, sysconf, yes, insmod, lsmod, rmmod

Tools

Busybox1.2.0 and busybox1.13 (provided in the CD-ROM)

WinCE6.0

Bootloader

stepldr

Copy Eboot to SDRAM to jump to Eboot

Eboot

Ethernet bootloader for wince, support downloading image through USB device port. supporting one Key to update Bootloader, Kernel, Yaffs, NK.bin and one Key to configure parameters of Linux

Driver (source Code)

Serial device

Three serial ports

10M/100M  Ethernet DM9000

USB Host

USB Host driver, supporting USB ActiveSync

USB Device

USB Device driver

RTC

Real time keeping

Buttons

User buttons

LCD

Coming with driver for 3.5", 4.3", 7" and 10.4" TFT LCD (resolution 800*600)

USB Camera

The chip of USB Camera is Vimicro 301p, the USB Camera is collecting dynamic picture and showing on the  LCD

USB WIFI

 

ADC

ADC driver

Touch Screen

Touch Screen driver

Audio

UDA1341

SD/MMC card

Block devices drivers

Others

Support MediaPlayer, IE browser, saving Register change, MFC, NET2.0 and so on.



* 1 EM2440-III Single board computer 
* 1 CD-ROM (WinCE BSP, Linux BSP, Documents, tools, Schematic Drawing, datasheets)
* 1 Ethernet cable
* 1 Serial Cable
1 USB Cable
* 1 5V@2A DC Power adapter


Product name

price

Buy Now

EM2440-III Single Board Computer

USD 60.00

EM2440-III Single Board Computer + 3.5Inch TFT LCD &TSP

USD 90.00

EM2440-III Single Board Computer + 4.3Inch TFT LCD &TSP

USD 85.00

EM2440-III Single Board Computer + 7Inch TFT LCD &TSP

USD110.00

Note: If order the optional items: GPS, Camera, WIFI, GPRS, VGA Module. Please kindly contact us atmarket@armdesigner.com

 

* 본 견적은 제품 가격 및 운송비 60불을 포함한 견적임.


 


상호명
: (주)우림티앤아이   대표자명 : 김석범   사업자등록번호 : 211-87-88913  이메일 : jun@woorimtni.co.kr
본사 : 서울 강남구 봉은사로 129 거평타운 1204호 대표전화 : 82-2-512-7661  팩스 : 82-2-512-7662
Copyright(C) 2011 Woorimtni Technologies All Rights Reserved.