|
|
* WinCE6.0, Linux2.6.28, Android2.3 and Ubuntu are available for the Kit
* Processor: Samsung ARM S3C6410, ARM1176JZF-S, up to 667MHz.
* 128MB DDR SDRAM, 166MHz
* 256MB NAND Flash, 16bit
* 2MB NOR Flash
* Two kinds of LCD/Touch Screen interface. Supporting 4.3 inch TFT LCD and 7 inch TFT LCD.
* 50-Pin GPIO connector, 50-Pin data and address BUS connector
* S-Video display interface
* One TVOUT
* One VGA interface
* One 10-pin A/D interface
* Two 20-pin SPI interface, it can connect WIFI,DTV Module
* One audio input interface (3.5mm audio jack)
* One 2-channel audio output interface (3.5mm audio jack)
* One 10/100M Ethernet interface (RJ45)
* One High-speed USB2.0 OTG port (Mini USB type interface)
* Four serial ports (Two are five-wire RS-232 DB9 interface, another two are three-wire TTL serial port led out from a 20-pin expansion connector)
* SD/MMC interface (supports 3.3V and 1.8V logic voltage)
* Two camera interfaces (30-pin FPC connector, support CCD or CMOS camera)
* One 20-pin JTAG interface, one 10-pin CPLD JTAG interface
* Eight buttons (Reset, Boot, User defined, On/Off)
* Power supply: +12V
* Optional module: GPS, WIFI, Camera, Bluetooth, USB HUB and Matrix Keyboard Module and 3G Modem
* Modular Design: carrier board-200mm x 140mm; CPU board- 81.2mm x 55.8mm
The KIT6410 Evaluation Board is developed based on Samsung ARM11 S3C6410X ARM1176JZF-S core 16/32-bit RISC microprocessor, which is designed to provide a cost-effective, low-power capabilities, high performance Application Processor solution for mobile phones, notebook, industrial navigation system and general applications. To provide optimized H/W performance for the 2.5G & 3G communication services, the ARM chip S3C6410X adopts 64/32-bit internal bus architecture. The 64/32-bit internal bus architecture is composed of AXI, AHB and APB buses. The chip also includes many powerful hardware accelerators for tasks such as motion video processing, audio processing, 2D/3D graphics, display manipulation and scaling. An integrated Multi Format Codec (MFC) supports encoding and decoding of MPEG4/H.263/H.264 and decoding of VC1. To reduce total system cost and enhance overall functionality, the S3C6410X includes many hardware peripherals such as a Camera Interface, TFT 24-bit true color LCD controller, System Manager (power management & etc.), and so on.
Boardcon KIT6410 Evaluation Board takes full features of the processor by providing a complete set of common system peripherals, minimizing overall system costs and eliminating the need to configure additional components. It supports 128MB DDR SDRAM and 256MB NAND Flash as well as high-speed USB2.0 OTG function. The board has exposed many other hardware interfaces including RS232 serial port, LCD/TSP, TVOUT, S-Video, Ethernet, SD/MMC, GPIO, camera, SPI, and JTAG. The board has two methods to boot the system from either SD card or NAND flash. It is able to support WinCE and Linux OS as well as coming with WinCE6.0 BSP and Linux2.6.28 BSP. Boardcon also provides OS of Google Android2.3 OS and Ubuntu.
The kit includes the CPU Board and Carrier Board, LCD, Windows Embedded CE 6.0 or Linux OS BSP, complete electronic documentation, schematics, demo applications, and third party Cross compilers (Arm-none-linux-gnueabi, 3.3.2, 3.4.1, 4.2.2-eabi) and embedded development environments (DNW, MoviNAND_Fusing_Tool.exe, activesync, sdboot, TCPMP, USB Interface Driver and so on) for evaluation.
.  KIT6410 Overview.pdf
|
OS |
Item |
Feature |
Description |
|
Linux2.6 |
Bootloader |
Uboot |
Main functions:
1. Supporting Nand Flash erase/write/read
2. Supporting USB download Image
3. Supporting print, set, save Environment Variables
4. Supporting memory’s contents display/compare/modify
5. Supporting bootm, bootargs setting |
|
Sdboot |
1. SD Card boot-up and download Image via USB (can replace JTAG)
2. Replace booting LOGO |
|
Image update |
Support updating image from SD card or USB |
|
Kernel and drivers |
Version |
Linux 2.6.28 |
|
File system Format |
ROM/CRAM/EXT2/EXT3/FAT/NFS/JFFS2/UBIFS |
|
Drivers |
Serial ports, RTC, Ethernet, 4.3” and7” LCD including Touch Screen, MMD/SD, USB Host, LEDs, AC97, Camera, GPS, High Speed SD card, USB Keyboard and Mouse, VGA, IIC, SPI, DMA, MFC, TVOUT, OpenGLES1.1 & 2.0, D3DM |
|
File System |
File System |
Yaffs or NFS File System |
|
Function |
Provided Lib (ALSA -lib, tslib, glibc), udev support |
|
Embedded GUI |
Qtopia 2.2.0 |
Support file browser, Mediaplayer, Calendar, time, counter, Touch Screen Calibration program, Plug-in manager. |
|
Network protocol
& application |
Network Protocol |
TCP/IP protocol, Telnet, FTP Client/server, boa web server |
|
Application |
H.264 display, MPEG-4 display, H.263 display, VC-1 display, 4-windows display, Camera preview & MFC encoding, MFC decoding & Camera preview, Camera input and JPEG encoding, JPEG decoding and display, MFC decoding & Camera preview thru TV, H.264 decoding thru TVOUT |
|
Cross compiler Environment |
3.3.2 , 3.4.1 , 4.2.2-eabi |
|
WinCE6.0 |
Boot |
eboot |
Start eboot from SD card, do not burn eboot via Jtag |
|
Boot Mode |
Boot WinCE from SD card, NAND Flash |
|
Image update |
Support updating image from SD card or USB |
|
System |
Characteristic |
KITL kernel debug, Reboot, Watchdog, RTC |
|
Drivers |
4.3” and 7” LCD including Touch Screen, VGA, TVOUT,S-Video, LEDs |
|
SD card, High speed SD card, SPI, AC97, Camera, Ethernet, USB Host, USB OTG, Serial ports, RTC,GPS, WIFI, 3GModule, IIC, JPEG, CF_ATA, CMM, DMA, DrvLib, MFC, POWERBUTTON, POWERCONTROL, UA0 |
|
Function |
220MB NAND Flash for user |
|
Power Management (backlight drive, battery-driven, sleep/wake-up function) |
|
Hive registry support |
|
ROM file system support |
|
Software features |
Source code and test program for MPC, MPEG-4/H264/H263/VC-1, DirectorShow Filter, JPEG, OpenGL ES1.1 & 2.0 |
|
TCPMP Media Player supports MPEG-4/H263/H264/VC-1, avi/mp4/m4v, mov/3gp/flv/mpg, DIVX/XVID, supporting Audio decoding MP1/MP2/MP3/AC3/AAC |
|
Many Message Tools-Skypem, MSN, QQ, OFFICE Tools-Word, Excel, PoewrPoint, PDF, txt |
|
.NET Compact Framework 3.5 |
|
Android2.3 |
Boot |
Version |
U-boot 1.3.4 |
|
Boot Mode |
Boot Android from SD card, NAND Flash |
|
Image update |
Support updating image from SD card or USB |
|
Kernel and drivers |
Version |
Linux 2.6.36-Android |
|
Drivers |
SDROM, Flash, Serial ports, RTC, 4.3” and 7” LCD including Touch Screen, MMD/SD, High Speed SD card, user buttons, IIC, SPI, JPEG, MFC, TVOUT, LCD display rotate, USB Host, USB Device, 2D/3D, Hardware decode, OpenGLES1.1 & 2.0, D3DM |
|
File System |
File System Format |
Yaffs2 (Androidfs-sdk-m5-rc15) |
|
Embedded GUI |
Android-2.3 |
Support file browser, Mediaplayer |
|
|
Application |
Alarm Clock, ASTR0, Mediaplayer, Music, Picsay, Gallery, Browser, Panda Reader |
|
Cross compiler Environment |
Arm-none-linux-gnueabi |
|
Debug Tools |
DNW, MoviNAND_Fusing_Tool.exe |
|
Ubuntu |
Boot |
Version |
U-boot 1.1.6 |
|
Boot Mode |
Boot Android from SD card, NAND Flash |
|
Image update |
|
|
|
