회사소개
협력사
Terasic-FGPA Series
All FPGA Main Board
- Stratix III, IV, V
- Arria II. V
- Cyclone II, III, IV, V
- Bundle Solution
- USB Blaster
- max10
Daughter Card
- Interface conversion
- Video & Image
- Networking
- AD/DA
- Capsense
- Multimedia
- RF
SOC Platform
Microtronix-FPGA Series
IP Core
HSMC Daughter Card
Configurable Processor
FPGA Board
- HD Dev Solution
University Training Classes
Universities Classes using the DE2 Series
Altera 온라인 데모
Design Software
Embedded Processors
Licensing
Bundled Solutions
ARM Development Kit
ARM Development Kit
Single board computers
Computer-on-Module
AS 수리
dimocore.com/terasicrepair
자료실
고객센터
공지사항
문의게시판
 
 
ARM Development Kit > ARM Development Kit
   
KIT2416 
 
가    격 : 견적문의
중    량 : 500g

 



  *  CPU: Samsung ARM926EJS S3C2416, 400MHz industrial frequency
  *  64MB DDR2 SDRAM
  *  256MB NAND Flash
  *  Build-in 2D graphics acceleration video card, the resolution is up to 1024 x 768
  *  Support 4 RS232 DB9 Ports, 1 RS485 Port(optional)
  *  Support 4-wire touch screen
  *  Support  PS/2 keyboard (optional)
  *  1 parallel printer port (optional)
  *  1 CAN 2.0 bus interface(optional)
  *  1 SD 2.0 and 1-way MMC4.0
  *  Support booting from NAND Flash and SD
  *  Integrated package service( development board + data +LCD)
  *  Operating System: WinCE6.0 and Linux 2.6


KIT2416
 ARM9 development board is developed by Boardcon, based on Samsung ARM9 S3C2416 microprocessor which is designed by Samsung in the second half of year 2008. The ARM chip S3C2416 can take the place of S3C2440A. It is with a clock speed of 400MHz, contains 2D graphics acceleration video card which support common graphics acceleration function such as DirectDraw and GDI. The resolution of the video card is up to 1024×1024 pixels. And besides, S3C2416 supports both MLC and SLC NAND Flash memory. S3C2416 supports booting from SD, USB, OneNand, NOR Flash and NAND Flash, to speed up the debugging and development for the upper application and low-level drivers greatly.

KIT2416 development board is using the structure of CPU board and mother board. The CPU board integrated S3C2416 ARM9 CPU, 64MB Mobile DDR2 SDRAM, 256MB NAND Flash, 10/100M ethernet control chip SMSC LAN9221 and AC97 voice control chip WM8731.The CPU board size is 40mm x 40mm x 8mm(Length*Width*Thickness). It's seamless welded on the mother board directly. The mother board is customizable. It integrates very rich interface resources for redevelopment, these resources include: VGA interface, ps/2 keyboard interface, RS232, RS485, CAN bus, 100M Ethernet RJ45 interface, LVDS interface, TFT-LCD interface, parallel printer port and digital I/O interface and so on. Besides, the drivers and the development cases in WinCE6.0 and Linux 2.6 help users with updating and replacing products quickly. The development board has passed the high and low temperature testing, to suitable for a variety of industrial application under the complex environment.

CPU board

CPU

S3C2416,ARM926EJ,400MHz

DDR2

64MB

Nand Flash

256MB NAND Flash

2D 

support in CPU

CPU board size

40mm x 40mm x 8mm

Mechanical properties

Board Size

161.93mm x 111.13mm x 15mm

Test point

Build-in

Electrical properties

Input voltage

+9V~24V@500mA(not link the LCD)

Power

300mA~350mA

Interface

TFT LCD
LVDS

32-bit true color, support the resolution from 320*240 ~ 1024*768 TFT LCD
support 1024*768 resolution, LVDS Interface

LAN

10/100M adaptive RJ45 LAN Interface

PS/2

PS/2 keyboard interface

CAN 2.0

CAN 2.0 interface

Touch

4-wire touchscreen support

USB 2.0

USB HOST interface and USB OTG interface

Audio Codec

I2S audio interface

SD/MMC

SD card slot

RS232

Four RS232 uart interface

Parallel

One parallel interface for printer

VGA

One VGA interface, support 1024*768 resolution

PWM

Two PWM interface

 

 

OS

Item

Feature

Description

Linux2.6.21

Bootloader

u-boot

u-boot-1.3.4
Main functions:
1.  Supporting Nand Flash erase/write/read
2.  Supporting net download Image
3.  Supporting print, set, save Environment Variables
5.  Supporting bootm, bootargs setting

Sdboot

1. SD Card boot-up and download Image via NET(can replace JTAG)

Image update

Support updating image from SD card or NET

Kernel and drivers

Version

Linux 2.6.21

File system Format

ROM/CRAM/EXT2/EXT3/FAT/NFS/JFFS2/YAFFS2

Drivers

Serial ports, RTC, Ethernet, 3.5", 4.3" and 7" LCD including Touch Screen, MMD/SD, USB Host, LEDs, AC97, Nand Flash

File System

File System

Yaffs File System

Function

Provided Lib (ALSA -lib, tslib, glibc), udev support

Embedded GUI

Qt/Embedded

Qtopia 2.2.0

Network protocol
& application

Network Protocol

TCP/IP, Telnet, FTP, Boa Web server,Remote login (telnet)

Cross compiler Environment

cross-4.2.2-eabi

 

WinCE6.0

Bootloader

 

Providing Source code and STEPLDR.bin

Eboot

Providing Source code and EBOOT.bin
Eboot main functions:
1.support SD card update image 
2. Format Nand Flash
3. Format BinFS
4. Low-level Format
5. update boot logo

Image update

Support updating image from SD card

System

Characteristic

Reboot, Watchdog, RTC

Driver

4.3", 5.6", 7", 10.4" LCD and including Touch Screen

SD card, AC97, Ethernet, USB Host, USB OTG, Serial ports, RTC, 2D  Accelerator, POWERBUTTON, SERIAL Driver, Audio, LED , I2C

Test program

Mediaplayer

serial test program

Activesync

SD/HSMMC test 

net test

Media player 9.0, Word and Internet Explorer 6.0

 

 





 

  * One KIT2416 board 
  * One CD-ROM (WinCE 6.0 BSP, Linux BSP, Documents, tools, Schematic, datasheets) 
  * One Serial cable 
  * One 12V@2A power adapter
  * One USB cable 
  * One Cross Ethernet cable  
  


Product name

price

Buy Now

KIT2416 Development Kit

USD150.00

KIT2416 Development Kit + 4.3Inch TFT LCD&TSP

USD190.00

KIT2416 Development Kit + 7Inch TFT LCD&TSP

USD200.00

 

 

본 견적은 제품 가격 및 운송비 60불을 포함한 견적임.

 


상호명
: (주)우림티앤아이   대표자명 : 김석범   사업자등록번호 : 211-87-88913  이메일 : jun@woorimtni.co.kr
본사 : 서울 강남구 봉은사로 129 거평타운 1204호 대표전화 : 82-2-512-7661  팩스 : 82-2-512-7662
Copyright(C) 2011 Woorimtni Technologies All Rights Reserved.