|
|
* CPU Board MINI6410/MINI2416/MINI2450 share same carrier board KIT3000
* Processor: Samsung S3C6410, ARM1176JZF-S, up to 667MHz. Or Samsung ARM9 S3C2416X, up to 400MHz,
or Samsung ARM9 S3C2450, up to 533MHz
* 256MB Mobile DDR SDRAM
* 256MB NAND Flash
* 4 2.0 Full Speed 12Mbps USB Host
* 2.0 High Speed 480Mbps USB OTG
* 6 serial ports (Two are 5-wire RS-232 DB9 interface, another two are 3-wire TTL serial port
led out from a 20-pin expansion connector)
* Two kinds of LCD/Touch Screen interface. Supporting 4.3" and 7" TFT LCD
* Audio input interface (3.5mm audio jack)
* 2-channel audio output interface (3.5mm audio jack)
* 10/100M Ethernet interface (RJ45)
* SD/MMC interface (supports 3.3V and 1.8V logic voltage)
* Two camera interfaces (30-pin FPC connector, support CCD or CMOS camera)
* Seven buttons (Reset, Boot, User defined)
* One TVOUT
* Power supply: +12V
* Optional module: GPS, WIFI, Camera, 3G, Bluetooth and AV Module
* Dimensions: carrier board-200mm x 140mm
CPU board-81.2mm x 55.8mm
The KIT3000 is a development board designed for the customer who wants to dedicate their carrier board and application development.
The KIT supports three versions of CPU Module which separately based on ARM11 Samsung S3C6410, ARM9 S3C2450 and ARM9 S3C2416. The customer spends lowest cost but can estimate three CPU and its kit relative software package, then finally select exactly aCPU and CPU Module that totally meet their specification. The KIT not only reduce the customer's development cost but also accelerate time to market.
The KIT includes the CPU Board and Carrier Board, LCD, Windows Embedded CE 6.0 or Linux OS BSP, complete electronic documentation, schematics, demo applications, and third party Cross compilers (Arm-none-linux-gnueabi, 3.3.2 , 3.4.1 , 4.2.2-eabi) and embedded development environments (DNW, MoviNAND_Fusing_Tool.exe, activesync, SDboot, TCPMP, USB Interface Driver and so on) for evaluation.
|
OS |
Item |
Feature |
Description |
|
Linux2.6.28 |
Bootloader |
u-boot |
u-boot-1.1.6
Main functions:
1. Supporting Nand Flash erase/write/read
2. Supporting USB download Image
3. Supporting print, set, save Environment Variables
4. Supporting memory’s contents display/compare/modify
5. Supporting bootm, bootargs setting |
|
SDboot |
1. SD Card boot-up and download Image via USB (can replace JTAG)
2. Replace booting LOGO |
|
Image update |
Support updating image from SD card or USB |
|
Kernel and drivers |
Version |
Linux 2.6.28 |
|
File system Format |
ROM/CRAM/EXT2/EXT3/FAT/NFS/JFFS2/UBIFS |
|
Drivers |
Serial ports, RTC, Ethernet, 4.3” and 7” LCD including Touch Screen, MMD/SD, USB Host, LEDs, AC97, Camera, HSMMC, USB Keyboard and Mouse, Nand Flash, DMA, JPEG, MFC, TVOUT, OpenGLES1.1 & 2.0, D3DM, IIS, SPI |
|
File System |
File System |
Yaffs File System |
|
Function |
Provided Lib (ALSA -lib, tslib, glibc), udev support |
|
Embedded GUI |
Qt/Embedded |
Qtopia 2.2.0 |
|
Network protocol
& application |
Network Protocol |
TCP/IP, Telnet, FTP, BOA Web Server |
|
Application |
H.264 display, MPEG-4 display, H.263 display, VC-1 display, 4-windows display, Camera preview & MFC encoding, MFC decoding & Camera preview, Camera input and JPEG encoding, JPEG decoding and display, MFC decoding & Camera preview thru TV, H.264 decoding thru TVOUT |
|
Cross compiler Environment |
3.3.2 , 3.4.1 , 4.2.2-eabi |
|
WinCE6.0 |
Boot |
Stepldr |
Providing Source code and STEPLDR.bin |
|
Eboot |
Providing Source code and EBOOT.bin
Eboot main functions:
1. Ethernet download: Set static IP, HDCP gets Dynamic IP, Mac address setting, download kernel automatically by Ethernet when the system starts.
2. USB download: update the image via USB OTG 2.0
3. Format Nand Flash
4. Format BinFS
5. Low-level Format
6. Set boot-up delayed time Booting process bar |
|
Image update |
Support updating image from SD card or USB |
|
System |
Characteristic |
KITL kernel debug, Reboot, Watchdog, RTC |
|
Driver |
4.3” and7” LCD including Touch Screen, LEDs |
|
SD card, High speed SD card, SPI, AC97, Camera, Ethernet, USB Host, USB OTG, Serial ports, RTC, GPS, WIFI, MFC, POWERBUTTON, POWERCONTROL, UA0, DrvLib |
|
Function |
220MB NAND Flash for user |
|
Power Management (backlight drive, battery-driven, sleep/wake-up function) |
|
Hive registry support |
|
ROM file system support |
|
Software features |
2D/3D graphics accelerator, coming with source code of OpenGLES test program |
|
Media player 9.0, Word and Internet Explorer 6.0 |
|
JPEG/JPG encoding and decoding, providing driver and test program |
|
.NET Compact Framework 3.5 |
|
Android2.3 |
Boot |
Version |
U-boot 1.3.4 |
|
Boot Mode |
Boot Android from SD card, NAND Flash |
|
Image update |
Support updating image from SD card or USB |
|
Kernel and drivers |
Version |
Linux 2.6.36-Android |
|
Drivers |
SDROM, Flash, Serial ports, RTC,4.3" and 7" LCD including Touch Screen, MMD/SD, High Speed SD card, user buttons, IIC, SPI, JPEG, MFC, TVOUT, LCD display rotate, USB Host,USB Device, 2D/3D,Hardware decode, OpenGLES1.1 & 2.0, D3DM |
|
File System |
File System Format |
Yaffs2 (Androidfs-sdk-m5-rc15) |
|
Embedded GUI |
Android-2.3 |
Support file browser, Mediaplayer |
|
|
Application |
Alarm Clock, ASTR0, Mediaplayer, Music, Picsay, Gallery, Browser, Panda Reader |
|
Cross compiler Environment |
Arm-none-linux-gnueabi |
|
Debug Tools |
DNW, MoviNAND_Fusing_Tool.exe |
* One KIT3000 Carrier board
* One CPU board (MINI6410, MINI2450 or MINI2416)
* One CD-ROM (WinCE 6.0 BSP, Linux BSP, Documents, tools, Schematic Drawing, datasheets)
* One Serial cable (IDC10-to-DB9)
* One 12V@2A Power adapter
* One USB cable
* One Cross Ethernet cable
|
Product name |
price |
Buy Now |
|
KIT3000 Development Kit |
USD280.00 |
|
|
KIT3000 Development Kit + 4.3Inch TFT LCD&TSP |
USD320.00 |
|
|
KIT3000 Development Kit + 7Inch TFT LCD&TSP |
USD340.00 |
|
|
Note: If order the optional items: GPS, Camera, WIFI, 3G, AV, Bluetooth Module. Please kindly contact us atmarket@armdesigner.com |
* 본 견적은 제품 가격 및 운송비 60불을 포함한 견적임.
|
|
|
