|
|
The DE10-Nano Development Kit presents a robust hardware design platform built around the Intel System-on-Chip (SoC) FPGA, which combines the latest dual-core Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. Users can now leverage the power of tremendous re-configurability paired with a high-performance, low-power processor system. Altera’s SoC integrates an ARM-based hard processor system (HPS) consisting of processor, peripherals and memory interfaces tied seamlessly with the FPGA fabric using a high-bandwidth interconnect backbone. The DE10-Nano development board is equipped with high-speed DDR3 memory, analog to digital capabilities, Ethernet networking, and much more that promise many exciting applications.
The DE10-Nano Development Kit contains all the tools needed to use the board in conjunction with a computer that runs the Microsoft Windows XP or later.
The DE10-Nano board has many features that allow users to implement a wide range of designed circuits, from simple circuits to various multimedia projects. The following hardware is provided on the board: FPGA Device - Intel Cyclone® V SE 5CSEBA6U23I7 device (110K LEs)
- Serial configuration device – EPCS128
- USB-Blaster II onboard for programming; JTAG Mode
- HDMI TX, compatible with DVI 1.0 and HDCP v1.4
- 2 push-buttons
- 4 slide switches
- 8 green user LEDs
- Three 50MHz clock sources from the clock generator
- Two 40-pin expansion headers
- One Arduino expansion header (Uno R3 compatibility), can be connected with Arduino shields
- One 10-pin Analog input expansion header (shared with Arduino Analog input)
- A/D converter, 4-pin SPI interface with FPGA
HPS (Hard Processor System) - 800MHz Dual-core ARM Cortex-A9 processor
- 1GB DDR3 SDRAM (32-bit data bus)
- 1 Gigabit Ethernet PHY with RJ45 connector
- USB OTG Port, USB Micro-AB connector
- Micro SD card socket
- Accelerometer (I2C interface + interrupt)
- UART to USB, USB Mini-B connector
- Warm reset button and cold reset button
- One user button and one user LED
- LTC 2x7 expansion header
Block Diagram of the DE10-Nano Board  Connectivity 
- Connect LTC2607 (AD/DA Daugher Card)
- Size：68.6x107mm (below picuture will updated later)
Documents| DE10-Nano User Manual | 1.5 | 8186 | 2017-06-01 |  | | Learning Roadmap | 1.0 | 635 | 2017-03-23 | |
CD-ROM| DE10-Nano CD-ROM | 1.2.0 | | 2017-06-01 | | | Quartus Download | 16.0 | | 2016-12-22 |  |
Daughtger Card Demonstrations| RFS | 1.0.0 | | 2017-06-22 | | | D8M | | | 2017-06-01 | | | SMK | | | 2017-02-24 | | | Arduino Shield | | | 2017-02-23 | | | LT24 | | | 2017-02-23 | | | MTL2 | | | 2017-02-23 | |
Linux BSP (Board Support Package): MicroSD Card Image| Linux Console (kernel 4.5) | 1.2 | | 2017-06-26 | | | Linux Xfce Desktop (kernel 4.1.33-ltsi-altera) | 1.0 | | 2017-04-11 | | | Linux LXDE Desktop (kernel 4.5) | 1.1 | | 2017-04-10 | |
BSP(Board Support Package) for Intel FPGA SDK OpenCL 16.1| DE10-Nano OpenCL BSP (.zip) | 1.0  DE10-Nano OpenCL BSP (.zip)
Version: 1.0Description:
Linux Kernel: 3.10
Min. MicroSD Capacity: 4GB | | 2017-05-05 | | | DE10-Nano OpenCL BSP (.tar.gz) | 1.0 DE10-Nano OpenCL BSP (.tar.gz)
Version: 1.0Description:
Linux Kernel: 3.10
Min. MicroSD Capacity: 4GB | | 2017-05-05 | | | DE10-Nano OpenCL User Manual | 1.0 | 2171 | 2017-05-04 | |
3D-Printer-Case| DE10_Nano_Case | | 117 | 2017-05-05 |  |
DE10-Nano 3D-Printer-CaseFile format:Stl 
|
|
|
