회사소개
협력사
Terasic-FGPA Series
All FPGA Main Board
- Stratix III, IV, V
- Arria II. V
- Cyclone II, III, IV, V
- Bundle Solution
- USB Blaster
- max10
Daughter Card
- Interface conversion
- Video & Image
- Networking
- AD/DA
- Capsense
- Multimedia
- RF
SOC Platform
Microtronix-FPGA Series
IP Core
HSMC Daughter Card
Configurable Processor
FPGA Board
- HD Dev Solution
University Training Classes
Universities Classes using the DE2 Series
Altera 온라인 데모
Design Software
Embedded Processors
Licensing
Bundled Solutions
ARM Development Kit
ARM Development Kit
Single board computers
Computer-on-Module
AS 수리
dimocore.com/terasicrepair
자료실
고객센터
공지사항
문의게시판
 
 
Terasic-FGPA Series > Daughter Card > Multimedia
   
HDMI-FMC 
 
가    격 : 견적문의
중    량 : 100g

Terasic HDMI-FMC is a HDMI transmitter/receiver daughter board with FMC (FPGA Mezzanine card) interface. The user can connect the HDMI module with the FPGA development kit via the FMC connector for HDMI image & video capturing, processing and display up to 4Kx2K@30fps resolution.

The HDMI-FMC provides both the HDMI Tx and Rx Module with the HDMI 1.4a features supported. The Tx module is able to supports most common standard and non-stand video input format, most common 3D formats and the video resolution up to 8-bit 4K(30Hz)、12-bit 1080p(60Hz)、12-bit 720p/1080i (120 Hz),and 16-bit 1080p (30 Hz). the audio interface supports S/PDIF, DSD , I2S and HBR audio format input.

The Rx module is able to supports all mandatory and additional 3D video formats and extended colorimetry(sYCC601, Adobe® RGB, Adobe YCC601, xvYCC extended gamut color CEC 1.4-compatible) with up to 36-bit Deep Color. the audio interface supports SACD, DSD , I2S and HBR audio format output.

We do provide complete demo for the HDMI-FMC working with different FPGA development kits. These demos are created by using RTL & ALTERA VIP, By referring these demos, users can quickly develop their applications.

 

 

 

 

 

Documents

TitleVersionSize(KB)Date AddedDownload
HDMI-FMC User Manual 1.0 23872016-12-02

CD-ROM

TitleVersionSize(KB)Date AddedDownload
HDMI-FMC CD-ROM 1.0.0  2016-12-02

Please note that all the source codes are provided "as is". For further support or modification, please contact Terasic Support and your request will be transferred to Terasic Design Service.
More resources about IP and Dev. Kit are available on Altera User Forums.

 

Reference Design

  • Loopback Demo

(Full source code included)

The Loopback demonstration establishes connection between the HDMI source device to the transmitter output of the HDMI daughter board. The Loopback (Internal bypass) generates the HDMI video and/or audio signals, as the audio and video output pins of the receiver are directly connected to the input audio and video pins of the transmitter.

Loopback Demo Hardware Setup

 


1. HDMI-FMC
2. Screw & Copper Pillar Pakage
3. CD Download Guide  

 


상호명
: (주)우림티앤아이   대표자명 : 김석범   사업자등록번호 : 211-87-88913  이메일 : jun@woorimtni.co.kr
본사 : 서울 강남구 봉은사로 129 거평타운 1204호 대표전화 : 82-2-512-7661  팩스 : 82-2-512-7662
Copyright(C) 2011 Woorimtni Technologies All Rights Reserved.