회사소개
협력사
Terasic-FGPA Series
All FPGA Main Board
- Stratix III, IV, V
- Arria II. V
- Cyclone II, III, IV, V
- Bundle Solution
- USB Blaster
- max10
Daughter Card
- Interface conversion
- Video & Image
- Networking
- AD/DA
- Capsense
- Multimedia
- RF
SOC Platform
Microtronix-FPGA Series
IP Core
HSMC Daughter Card
Configurable Processor
FPGA Board
- HD Dev Solution
University Training Classes
Universities Classes using the DE2 Series
Altera 온라인 데모
Design Software
Embedded Processors
Licensing
Bundled Solutions
ARM Development Kit
ARM Development Kit
Single board computers
Computer-on-Module
AS 수리
dimocore.com/terasicrepair
자료실
고객센터
공지사항
문의게시판
 
 
Terasic-FGPA Series > All FPGA Main Board > Bundle Solution
   
VEEK-MT2S 
 
가    격 : 견적문의
중    량 : 500g

The VEEK-MT2S Development Kit is a comprehensive embedded design environment with everything  developers need to create processing-based systems. The VEEK-MT2S delivers an integrated platform including hardware, design tools, and reference designs for developing embedded software and hardware platforms in a wide range of applications. The fully integrated kit allows developers to rapidly customize their processor and IP to best suit their specific application. The VEEK-MT2S features a DE10-Standard development board targeting Intel Cyclone® V SX SoC FPGA, as well as a capacitive LCD multimedia color touch panel which supports 5-point multi-touch and gestures.

The all-in-one embedded solution offered on the VEEK-MT2S, in combination with LCD touch panel and digital image module, provides developers the ideal platform for multimedia applications with unparallel processing performance. Developers can benefit from the use of FPGA-based embedded processing system utilizing mitigating design risk and obsolescence, design reuse, reducing bill of material (BOM) costs by integrating powerful graphics engines within the FPGA.

Please refer to the VEEK-MT2S Control Panel for SoC reference design in Linux touch-screen display.

 

DE10-Standard Development Board

Cyclone V SX SoC—5CSXFC6D6F31C6N

  • Dual-core ARM Cortex-A9 (HPS)
  • 110K programmable logic elements
  • 5,761 Kbits embedded memory
  • 6 fractional PLLs
  • 2 hard memory controllers

Configuration Sources

  • Serial configuration device – EPCS128 for the FPGA
  • On-board USB Blaster II (normal type B USB connector)

Memory Device

  • 64MB (32Mx16) SDRAM for the FPGA
  • 1GB (2x256MBx16) DDR3 SDRAM for the HPS
  • microSD card socket for the HPS

Peripherals

  • Two USB 2.0 Host Ports (ULPI interface with USB type A connector) on HPS
  • UART to USB (USB Mini B connector)
  • 10/100/1000 Ethernet
  • PS/2 mouse/keyboard
  • IR emitter/receiver
  • I2C multiplexer

Connectors

  • One HSMC expansion header (used for MTLC2)
  • One 40-pin expansion header
  • One 10-pin ADC input header
  • One LTC connector (one Serial Peripheral Interface (SPI) master ,one I2C bus, and one GPIO interface)

Display

  • 24-bit VGA DAC
  • 128x64 dots LCD Module with Backlight on HPS

Audio

  • 24-bit CODEC, Line-in, line-out, and microphone-in jacks

Video Input

  • TV decoder (NTSC/PAL/SECAM) and Video-in connector

ADC

  • Sample rate: 500 KSPS
  • Channel number: 8
  • Resolution: 12 bits
  • Analog input range : 0 ~ 4.096 V

Switches, Buttons and LEDs

  • 5 user keys (4 for the FPGA and 1 for the HPS)
  • 10 user switches for the FPGA
  • 11 user LEDs (10 for the FPGA and 1 for the HPS)
  • 2 HPS reset buttons (HPS_RESET_n and HPS_WARM_RST_n)
  • Six 7-segment displays

Sensors

  • G-Sensor on HPS

Power

  • 12V DC input

Capacitive Multi-touch Screen Module

LCD Display

  • 7-inch TFT LCD with pixel resolution of 800*480
  • 16 million colors (8-bit RGB)
  • LED backlight

Capacitive Multi-Touch

  • Five points multi-touch
  • I2C interface
  • Gesture supporting

 

Gesture Table

  • One Point

  

  • Two-Point

8-Megapixel Digital Image Sensor

  • 3,264H x 2,448V active pixels with Bayer color arrangement
  • Sensitivity 940mV/Lux-sec
  • Gesture supporting

Ambient Light Sensor

  • Precise illumination measurement under diverse lighting conditions
  • Programmable interrupts
  • 16-bit digital output with I2C fast-mode at 400 kHz
  • Programmable analog gain and Integration time
  • 50/60Hz lighting ripple rejection

MPU9250 Accelerometer Features

  • Digital-output triple-axis accelerometer
  • Programmable full scale range of ±2g, ±4g, ±8g and ±16g and integrated 16-bit
  • Self-test

MPU9250 Gyroscope Features

  • Digital-output X-, Y-, and Z-Axis angular rate sensors
  • User-programmable full-scale range of ±250, ±500, ±1000, and ±2000°/sec and integrated 16-bit ADCs
  • Self-test

MPU9250 Magnetometer Features

  • 3-axis silicon monolithic Hall-effect magnetic sensor with magnetic concentrator
  • Wide dynamic measurement range and high resolution with lower current consumptions
  • Output data resolution of 14 bit (0.6μT/LSB) or 16 bit (15μT/LSB)
  • Full scale measurement range is ±4800μT
  • Magnetometer normal operating current: 280μA at 8Hz repetition rate
  • Self-test function with internal magnetic source to confirm magnetic sensor operation on end products

 

 

  • Size: 157.56X227.97mm

 

Documents

TitleVersionSize(KB)Date AddedDownload
VEEK-MT2S User Manual 1.0 37992017-05-05

CD-ROM

TitleVersionSize(KB)Date AddedDownload
VEEK-MT2S CD-ROM 1.0.1  2017-06-06

Linux BSP (Board Support Package): MicroSD Card Image

TitleVersionSize(KB)Date AddedDownload
Linux LXDE Desktop (Kernel 4.5) 1.2  2017-06-06

Please note that all the source codes are provided "as-is". For further support or modification, please contact Terasic Support and your request will be transferred to Terasic Design Service.
More resources about IP and Dev. Kit are available on Altera User Forums.

 

Other course resources you might be interested:

School: Cornell University Senior Lecturer: Bruce Land
Course 1: - ECE5760 Advanced Microcontroller Design and system-on-chip [DE2]
Course 2: - ECE 5760 Simplified Floating Point for DSP [DE2] 

The VEEK-MT2S (DE10-Standard + MTLC2) Kit includes the following example designs and Linux BSP. 

Regarding the DE10-Standard only example designs and BSP, please refer to http://de10-standard.terasic.com/cd 

Demonstration List

  • FPGA
    • E_Compass
    • G_Sensor
    • Painter
    • VIP
    • VIP Camera
    • Camera RTL
  • SoC Advanced
    • OpenCV
      • Rough Line
      • Camera IN
      • Face Detection
  • SoC and FPGA
    • Control Panel
    • Light Sensor ADC9300
    • 9-Axis Sensor MPU9250

Linux LXDE Desktop BSP

  • Supports MTLC2 Display and Touch Screen
  • Built-in QT and OpenCV Library
  • GNU Tool Chain for ARM
  • Supports USB Bluetooth, WiFi, and Camera Driver
  • Supports ALSA (Advanced Linux Sound Architecture) Framework

VEEK-MT2S Control Panel Demonstration

VEEK-MT2S Control Panel – allows users to access various components on the VEEK-MT2S from the LXDE Desktop BSP provided by Terasic. The relative project source codes are provided in the System CD.

 

OpenCV Face Detection Demonstration

Utilizing the OpenCV function to perform face detection with the 8 Mega Pixel Camera on MTLC2.

 

VEEK-MT2S G-Sensor Demonstration

This design utilizes an embedded NIOS II CPU to communicate with the on-board digital accelerometer as well as the ambient light sensor. The accelerometer outputs as a level display and the readings for the ambient light are displayed in the upper right-hand corner.

 

VEEK-MT2S Painter Demonstration

This reference design showcases VEEK-MT2S's sensitive capacitive touch-screen capabilities. Supporting multi-paint coordinates and multi-touch gestures, this demonstration allows users to paint with five fingers. Gestures that are drawn on the canvas are displayed in the gesture indicator box left of the color palette.

 

VEEK-MT2S E-Compass Demonstration

This demonstration shows an e-compass on the LCD panel based on information measured by accelerometer and magnetometer in the MPU9250

 

 


  1. VEEK-MT2S Kit
  2. VEEK-MT2S Quick Start Guide
  3. microSD Adapter
  4. microSD Card (Pre-programmed & Installed)
  5. Card Reader
  6. IR Remote Control 
  7. Type A to Mini-B USB Cable
  8. Type A to B USB Cable
  9. Power DC Adapter (12V)

 


상호명
: (주)우림티앤아이   대표자명 : 김석범   사업자등록번호 : 211-87-88913  이메일 : jun@woorimtni.co.kr
본사 : 서울 강남구 봉은사로 129 거평타운 1204호 대표전화 : 82-2-512-7661  팩스 : 82-2-512-7662
Copyright(C) 2011 Woorimtni Technologies All Rights Reserved.