The Video and Embedded Evaluation Kit - Multi-touch (VEEK-MT) is a comprehensive design environment with everything embedded developers need to create processing-based systems. VEEK-MT delivers an integrated platform that includes hardware, design tools, intellectual property (IP) and reference designs for developing embedded software and hardware platform in a wide range of applications. The fully integrated kit allows developers to rapidly customize their processor and IP to best suit their specific application. The VEEK-MT features the DE2-115 development board targeting the Cyclone IV E FPGA, as well as a capacitive LCD multimedia color touch panel which natively supports multi-touch gestures. A 5-megapixel digital image sensor, ambient light sensor, and 3-axis accelerometer make up the rich feature-set.
Cyclone IV EP4CE115 FPGA114,480 logic elements (LEs)432 M9K memory blocks3,888 Embedded memory (Kbits)266 Embedded 18 x 18 multipliers4 General-purpose PLLs528 User I/OsConfigurationEPCS64 serial configuration deviceOn-board USB-Blaster circuitryJTAG and AS mode configuration supportedMemory Devices128MB SDRAM2MB SRAM8MB FLASH with 8-bit mode32Kbit EEPROMSwitches and Indicators18 switches and 4 Push-buttons18 red and 9 green LEDsEight 7-segment displaysAudio24-bit encoder/decoder (CODEC)Line-in, line-out, and 3.5mm jacksCharacter Display16x2 LCD moduleOn-board Clocking CircuitryThree 50MHz oscillator clock inputsSMA connectors (external clock input/output)SD Card SocketProvides SPI and 4-bit SD mode for SD card accessTwo Gigabit Ethernet PortsIntegrated 10/100/1000 Ethernet172-pin High Speed Mezzanine Card (HSMC)Extension for LCD and camera moduleConfigurable I/O standards (voltage levels: 3.3/2.5/1.8/1.5V)USB Type A and BProvides host and device controller compliant with USB 2.0 Support for data transfer at full-speed and low-speedPC driver available
40-pin Expansion PortConfigurable I/O standards (voltage levels: 3.3/2.5/1.8/1.5V) VGA-out ConnectorVGA DAC (high speed triple DACs) DB-9 Serial ConnectorRS-232 port with flow controlPS/2 ConnectorPS/2 connector for connecting a PS/2 mouse or keyboard Remote ControlInfrared receiver module TV-in ConnectorTV decoder (NTSC/PAL/SECAM) Power12V DC inputSwitching and step-down regulators LM3150MH
Configurable I/O standards (voltage levels: 3.3/2.5/1.8/1.5V)
VGA DAC (high speed triple DACs)
RS-232 port with flow control
PS/2 connector for connecting a PS/2 mouse or keyboard
Infrared receiver module
TV decoder (NTSC/PAL/SECAM)
7-inch TFT LCD with pixel resolution of 800*48016 million colors (8-bit RGB)LED backlight
2,592H x 1,944V active pixels with Bayer color arrangementProgrammable frame rate up to 70FPS (VGA)Snapshot-mode mode to take frames on demandSimple two-wire serial control interface
Up to 13-bit resolution at +/- 16gSPI (3- and 4-wire) digital interfaceFlexible interrupts modes
Precise illumination measurement under diverse lighting conditionsProgrammable interrupts16-bit digital output with I2C fast-mode at 400 kHz Programmable analog gain and Integration time50/60Hz lighting ripple rejection DownloadDocumentsTitleVersionSize(KB)Date AddedDownloadVEEK-MT User manual45172014-05-21DE2-115 User manual89102010-09-17CD-ROMTitleVersionSize(KB)Date AddedDownloadVEEK-MT CD-ROM1.1.0 2014-05-21